Tygris R210 Heavy Duty Adhesive Non-Chlorinated 500
High strength contact adhesive in non-chlorinated form. An easy to use adhesive for bonding most surfaces, including textile, foam, rubber, plastic, foil, cardboard and paper. Good for fixing down carpets, underlay and floor tiles. In a non-chlorinated form for maximum safety.
Benefits:
Strong, repositionable adhesion
Fast drying
Bonds most surfaces
High strength bond
Non-chlorinated for maximum safety
Technical Data:
Appearance: Clear fan of rapidly drying product
Odour: Typical glue/solvent odour
Contents: Blend of styrene butadiene polymer and supplementary additives in acetone with butane propellant Storage: Below 50C
Solubility: Slightly soluble in water
Flash Point: <0C
Temperature range: Up to 50C maximum surface temperature
Relative density: 0.665
Size: 400ml can.
Directions for Use:
Ensure surfaces are clean and dry. Shake can well before use. Spray a number of light coats. For maximum adhesion, cover both surfaces. Allow a few moments for solvent to evaporate, then press surfaces together firmly, working out from the centre. Clean off excess adhesive with a solvent. When finished, invert can and spray briefly to clear the nozzle. Do not use when surface temperatures will exceed 50C Not for use on plasticised PVC Use only in well-ventilated areas.
